Problems from Nov 17, 2026

All 4 problems from Nov 17, 2026, across Physics, Math, Chemistry, Electrical engineering. Try each one first, then check the answer and the main steps below.

Physics

Problem 1: Plastic in oil

The figure shows a plastic block floating in cooking oil. The share of its height that is under the liquid equals its density divided by the liquid's density.

How many centimetres of it are under the surface?

Answer: 8 cm

How it is solved

  1. Find the share under the surface: $400 \div 800$. ($0.5$)
  2. Take that share of the height: $0.5 \times 16$. ($8\ \text{cm}$)

Math

Problem 1: A stage plan

A stage is drawn on a floor plan. Its corners are shown on the grid.

What is its area, in square units?

Answer: 25

How it is solved

  1. Find the width and the height: Width $2 - (-3) = 5$, height $4 - (-1) = 5$.
  2. Area: $5 \times 5$. ($25$)

Chemistry

Problem 1: Adding water

A student adds water. The figure shows the level of the liquid in the measuring cylinder, in millilitres. Then $15\ \text{mL}$ more is poured in.

What is the new reading, in millilitres?

Answer: 43

How it is solved

  1. Read the scale: The level is $28\ \text{mL}$. ($28\ \text{mL}$)
  2. Add what is poured in: $28 + 15$. ($43\ \text{mL}$)

Electrical engineering

Problem 1: Output at slot 6

The timing diagram shows inputs A and B of a NAND gate over 8 time slots. A is 01101011 and B is 11010110.

What is the output Y in time slot 6? (Answer 0 or 1.)

Answer: 1

How it is solved

  1. Read both inputs in that slot: In slot 6, A is 0 and B is 1.
  2. Apply the gate: The NAND gate gives $1$. ($1$)